Nooie Cam Doorbell Setup & Installation Guide

What’s in the box?

• Nooie Cam Doorbell
• Base Station with Chime
• Type-C Charging Cable
• Network Cable
• Wall Mount Plates(Flat & 15° angle)
• Pin (For Security Lock)
• Concrete & Wood Screws
• Anchors

Required Tools

• Screwdriver
• Electric Drill

Video Tutorial

Set Up Your Base Station

1. First make sure the Doorbell battery is fully charged.

2. Open the Nooie App, tap Cam, then tap + plus sign on the top right

3. Tap Add Camera

4. Tap Nooie Cam Doorbell

5. Tap Next

6. Tap Next

7. Plug in the Base Station. When the blue light flashes, tap LED Flashing Blue.

   • No flashing blue light? See: My Base Station is plugged in, but not flashing blue.

8. Enter your WiFi name and password, and tap Next.

   WiFi Tips!

   • If your WiFi signal is not stable, try using a cable connection.
   • Some special symbols in a WiFi password may cause connection failures.
   • Still can't connect the Base Station? See: My Wi-Fi password is correct but I can't connect my base station.

9. Tap Go to Connect to connect your phone to the base station hotspot. It can take 20s-40s to connect your Base Station.

   • You will leave the Nooie App, and go to your phone's WiFi settings.
   • Look for the network Nooie_XXXX, select it to connect to the hotspot, then return to the Nooie App.
   • Can't connect? See: Unable to connect to the Base Station hotspot.
   • Connection failed? See: Unable to connect the Base Station to my Wi-Fi

10. After connecting to WiFi, you will connect the Doorbell.

Connect Base Station to Doorbell

1. Press the Base Station button one time. When the Base Station LED light flashes slowly, tap Next.
   • If the LED does not flash slowly, wait a few more seconds. The Base Station may still be configuring the WiFi signal.
2. Insert the fully-charged, Doorbell battery. Find the reset button located on the back of the Doorbell, and use a pin to press the reset button once. When the LED indicator turns to steady white, tap Next.
   • LED indicator did not turn to steady white? See: Doorbell LED indicator didn't turn to steady white.
   • If you get a "Connection Error", wait a few seconds more before proceeding to the next step. The Base Station may still in the process of connecting to the Doorbell.
3. Ring the Doorbell to test the connection between the Base Station and Doorbell. Tap Continue.
   • If the Doorbell rang, but the Base Station did not chime, wait for 60 seconds. It will take extra time for the first connection.
   • No ring? See: The Base Station didn't ring when I pressed the Doorbell.
4. Follow the installation video, and tap I've installed my Doorbell. You're all set!

Physical Installation

1. Before mounting the Doorbell in your desired location, use the Nooie App to check the camera's field of vision.
2. For the best field of vision, install the doorbell 4 ft. (1.2m) from the ground and do not place in direct sunlight.
3. Metal objects near by may interfere with the wireless signal, check before installing

Mounting Guide

1. Use the Mounting Template Sticker for drilling holes. If you need additional templates, you can download it here.
2. Choose appropriate screws for the type of surface, and drill pilot holes(see suggestions here). Attach the mounting plate that provides the best view from your chosen location.
   • WRITE LIST HERE
3. Secure the top of the Doorbell first. Attach it to the hook of the mounting plate, and push down until it is firmly locked.