On the Home page from the bottom navigation, tap Add in the top right corner**.**
Choose Nooie Smart Plug.
Confirm that your plug LED is flashing white rapidly (twice per second), then go to the next step. If the light isn't flashing, please reset the plug by pressing holding its power button for 5 seconds.
Connect to WiFi, enter the password, and tap Next.
Connect via 2.4G WiFi (you may need to manually enter the name of the network if it is hidden).
Enter the WiFi password (special symbols in the WiFi password may cause failure in connection).
Tap Next to connect the Nooie Smart Plug. This may take 90 seconds.
If the connection fails, you can try to connect in using the AP (access point) mode by pressing and holding the power button for 5 seconds until the light flashes slowly (once every three seconds).
Connect to WiFi and then connect to the Nooie Smart Plugs's hotspot in your phone's settings.
