During Setup
The indicator light flashes white rapidly (twice per second) - this is the default (EZ) pairing mode
The indicator light flashes white slowly (once every 3 seconds) - this is the access point (AP) mode, an alternative mode for pairing
How to reset the Nooie Smart Plug and switch between EZ and AP mode
If the white light is not flashing when pairing, reset the device by pressing and holding the power button for 5 seconds to activate the pairing mode. EZ (easy pairing) mode is the default pairing method.
If the connection fails, try the alternative pairing method using the Smart Plug's access point (AP). To switch from EZ mode to AP mode, please make sure that your Smart Plug is in EZ mode (flashing white rapidly), and press and hold the power button for 5 seconds. The light will flash white slowly (once every 3 seconds) in AP mode.
